Esko ChemGard 809 Gauntlet

Features

Superior hand protection when handling chemicals and solvents
Tough—abrasion resistance
Double-dipped NBR, non-slip textured micro foam, superior grip
Superior comfort, fit and ergonomics
Actifresh anti-bacterial protection
Sizes 7(S)-12(3XL)

Click to download Esko’s chemical resistance glove selection guide.
Recommendations are advisory. The suitability of a product for a specific application must be determined by testing by the user.

EN 388:2016 4142A

Updates the EN 388:2008 standard. It continues the previous test’s methods with some alterations including a change to the way the coup cut test is carried out (the second figure giving the coup cut resistance rating may be expressed as ‘X’ if the glove is not tested under the coup test or if the rolling blade becomes blunt before the test is completed). It adds a fifth letter (A to F, with F being highest) for cut resistance using the sliding blade TDM test and a sixth letter to indicate impact protection, expressed as ‘P’ for pass. If the glove is not designed to provide impact protection the sixth figure is left out, or sometimes ‘F’ (fail).

EN 374-1 JKLMNO

Indicates that the product meets permeation standards for protective gloves, with permeation resistance of (Type A) at least 30 minutes to 6 test chemicals, (Type B) at least 30 minutes to 3 chemicals and (Type C) at least 10 minutes to 1 chemical. Letters under the shield identify the chemicals.

EN 374-5

Tests the glove for safety in risks of contact with micro-organisms—bacteria, fungi

Uses